Drive System
Servo-electricNo hydraulic oil, fewer hydraulic maintenance concerns, and cleaner operation on the shop floor.
Dener Servo Electric Press Brakes
DDM SERVO BRAKEServo-Electric CNC Bending Without Hydraulic Oil
The Dener DDM Servo Electric Press Brake is built for shops that want clean, precise, energy-efficient bending with fast response, quiet operation, lower maintenance, and advanced CNC control.
Instead of relying on hydraulic oil and hydraulic components, the DDM uses servo-electric drive technology to deliver responsive ram movement, cleaner operation, and efficient forming performance. It is a strong fit for shops comparing electric bending against hydraulic brakes and looking for better energy use, less mess, and more controlled production.
No Hydraulic OilServo-Electric DriveUp to 50% Energy SavingsUp to 30% Faster ResponseESA / Delem ControlsMulti-Axis Backgauge Options
Model Range
DDM SeriesAvailable in multiple model sizes to match part length, tonnage needs, and bending applications.Energy Use
Up to 50% savingsDesigned to reduce energy consumption compared to traditional hydraulic press brake operation.Controls
ESA / DelemESA S 675 control with available Delem DA-66T and DA-69T options for advanced bending workflow.Performance overview
Cleaner, Faster, More Efficient CNC Bending
The DDM Servo Brake is designed for shops that want the accuracy of CNC forming with the efficiency and cleanliness of electric drive technology.
No Hydraulic Oil
Servo-electric bending eliminates hydraulic oil from the drive system, helping reduce mess, leaks, oil maintenance, and hydraulic service concerns.
Lower Energy Use
The electric drive system is designed to use power more efficiently than traditional hydraulic press brakes, helping reduce operating cost over time.
Faster Response
Servo-electric ram control supports fast response and efficient motion, helping operators move through bending cycles with less wasted time.
Quiet Operation
With no constantly running hydraulic pump, the DDM supports a quieter and cleaner production environment.
Advanced CNC Control
ESA and optional Delem controls help operators program parts, manage bend sequences, and support more consistent forming.
Backgauge Flexibility
Available backgauge configurations allow the machine to be matched to part complexity, repeat work, and production demands.
Configuration
Configure the DDM Around Your Bending Work
The right servo-electric press brake setup depends on part length, material thickness, tonnage needs, control package, backgauge axes, tooling, and clamping requirements.
Capacity and Length
Select the model based on required tonnage, bending length, part size, and material thickness.
Control Package
ESA S 675 provides strong CNC bending capability, with Delem DA-66T and DA-69T options available for shops that want more advanced programming.
Backgauge Options
Choose from standard X/R configurations through higher-axis backgauge systems for more complex parts and repeat production.
Tooling and Clamping
Fast punch and die clamping options help reduce setup time and make daily changeovers more efficient.
Shop Environment
Servo-electric bending is a strong fit for clean, quiet, energy-conscious production areas.
Buyer Fit
Ideal for shops that value precision, efficiency, lower maintenance, and a cleaner alternative to hydraulic bending.
Key features
Servo-Electric Features That Matter
Focus on the features that affect daily bending work: energy use, response time, maintenance, control, accuracy, noise, and operator workflow.
Servo-Electric Drive
The DDM uses electric drive technology instead of hydraulic power, giving shops a cleaner and more efficient bending platform.
No Hydraulic Oil
Removing hydraulic oil from the drive system helps reduce leaks, oil changes, temperature issues, and hydraulic maintenance concerns.
Lower Power Consumption
The DDM is designed to use less energy during operation, which can reduce long-term operating costs compared to traditional hydraulic systems.
Fast Ram Response
Servo-electric motion supports quick, responsive ram movement for efficient bending cycles and improved operator workflow.
Advanced CNC Programming
ESA and available Delem controls support bend programming, sequence management, and more consistent daily forming.
Multi-Axis Backgauge Options
Backgauge configurations can be matched to part complexity, repeatability requirements, and production needs.
Fast Tooling Setup
Available punch and die clamping options help reduce setup time and make frequent job changes easier.
Cleaner Shop Floor
No hydraulic oil, quieter operation, and efficient electric drive technology make the DDM a strong fit for cleaner production environments.
Applications
Best-Fit Applications
The DDM is built for shops that want clean, accurate, energy-efficient CNC bending without the maintenance demands of a hydraulic drive system.
Precision Sheet Metal Bending
A strong fit for shops forming parts where accuracy, repeatability, and controlled CNC bending matter.
Clean Production Environments
Ideal for facilities that want to avoid hydraulic oil, reduce mess, and keep the bending area cleaner.
High-Mix Job Shop Work
Good for shops running frequent part changes where fast setup, CNC control, and backgauge flexibility help reduce downtime.
Energy-Conscious Manufacturing
A practical choice for buyers who factor energy use and operating cost into the equipment decision.
Quiet Shop Environments
A strong fit for production areas where lower noise and cleaner operation are important.
Small and Medium Fabrication Shops
Works well for shops that need precise CNC bending without stepping into larger hydraulic systems.
Repeat Part Production
Supports consistent forming for brackets, covers, panels, enclosures, guards, and repeat sheet metal components.
Shops Comparing Electric vs. Hydraulic Bending
A strong candidate when the buyer wants lower maintenance, cleaner operation, and more efficient machine response.
Features & benefits
Why Shops Choose the DDM Servo Brake
The DDM is not just about removing hydraulics. It is about cleaner bending, lower energy use, fast response, quieter operation, and better control over daily forming work.
Cleaner Than Hydraulic Bending
No hydraulic oil means less mess, fewer leak concerns, and a cleaner bending area.
Lower Operating Cost Potential
Energy-efficient electric drive technology can help reduce power consumption and long-term operating costs.
Faster Machine Response
Servo-electric motion helps the brake respond quickly during bending cycles and setup movement.
Less Maintenance Hassle
Without hydraulic oil and hydraulic components in the drive system, shops can reduce common hydraulic maintenance concerns.
Better Fit for Precision Work
CNC control, servo-electric response, and backgauge options help support repeatable, accurate forming.
Easier to Live With Daily
Quiet operation, cleaner drive technology, and efficient setup options make the DDM easier to run in modern fabrication environments.
Technical specs
Technical Specifications
Final specifications depend on the selected DDM model, tonnage, bending length, control package, backgauge configuration, tooling, clamping, and safety options.
DDM Servo Brake Specifications
| Specification | Value |
|---|---|
| Series | DDM Servo Brake |
| Drive | Servo-electric |
| Hydraulic System | None |
| Model Range | DDM Series |
| Capacity | Model dependent |
| Bending Length | Model dependent |
| Control | ESA S 675 standard; Delem DA-66T / DA-69T optional where available |
| Backgauge | X/R standard or higher-axis configurations available |
| Clamping | Fast punch and die clamping options available |
| Energy Savings | Up to 50% compared to hydraulic operation |
| Speed Advantage | Up to 30% faster response compared to hydraulic operation |
| Best Fit | Clean, precise, energy-efficient CNC bending |
DDM Servo Brake Specifications
- Series
- DDM Servo Brake
- Drive
- Servo-electric
- Hydraulic System
- None
- Model Range
- DDM Series
- Capacity
- Model dependent
- Bending Length
- Model dependent
- Control
- ESA S 675 standard; Delem DA-66T / DA-69T optional where available
- Backgauge
- X/R standard or higher-axis configurations available
- Clamping
- Fast punch and die clamping options available
- Energy Savings
- Up to 50% compared to hydraulic operation
- Speed Advantage
- Up to 30% faster response compared to hydraulic operation
- Best Fit
- Clean, precise, energy-efficient CNC bending
Downloads
Planning Documents
Request the documents needed to plan the machine, facility layout, power requirements, installation, and final configuration.
Request Planning DocumentsProduct Brochure
Overview of machine models, options, and available configurations.
Technical Datasheet
Detailed specifications for the selected DDM configuration.
Floor Layout Review
Plan machine placement, material flow, access space, and installation requirements.
Power and Facility Requirements
Confirm electrical, air, foundation, rigging, and facility needs before installation.
RFQ form
Request Pricing For Dener DDM Servo Electric Press Brake
Send the core buying inputs so sales can confirm the right machine, options, support path, and quote requirements.
Servo-electric press brake review
Is Servo-Electric Bending Right for Your Shop?
Tell us your material, thickness, bending length, tonnage needs, part types, and production goals. We'll help determine whether a DDM servo-electric brake or hydraulic press brake is the better fit.